Functionalization of PCL-Based Fiber Scaffolds with Different Sources of Calcium and Phosphate and Odontogenic Potential on Human Dental Pulp Cells.

This study investigated the incorporation of sources of calcium, phosphate, or both into electrospun scaffolds and evaluated their bioactivity on human dental pulp cells (HDPCs). Additionally, scaffolds incorporated with calcium hydroxide (CH) were characterized for degradation, calcium release, and odontogenic differentiation by HDPCs. Polycaprolactone (PCL) was electrospun with or without 0.5% w/v of calcium hydroxide (PCL + CH), nano-hydroxyapatite (PCL + nHA), or ß-glycerophosphate (PCL + ßGP). SEM/EDS analysis confirmed fibrillar morphology and particle incorporation. HDPCs were cultured on the scaffolds to assess cell viability, adhesion, spreading, and mineralized matrix formation. PCL + CH was also evaluated for gene expression of odontogenic markers (RT-qPCR). Data were submitted to ANOVA and Student's t-test (α = 5%). Added CH increased fiber diameter and interfibrillar spacing, whereas ßGP decreased both. PCL + CH and PCL + nHA improved HDPC viability, adhesion, and proliferation. Mineralization was increased eightfold with PCL + CH. Scaffolds containing CH gradually degraded over six months, with calcium release within the first 140 days. CH incorporation upregulated DSPP and DMP1 expression after 7 and 14 days. In conclusion, CH- and nHA-laden PCL fiber scaffolds were cytocompatible and promoted HDPC adhesion, proliferation, and mineralized matrix deposition. PCL + CH scaffolds exhibit a slow degradation profile, providing sustained calcium release and stimulating HDPCs to upregulate odontogenesis marker genes.

Correction: Pontes do Nascimento et al. Synthesis of Mesoporous Zn1-xMxAl2O4 Substituted by Co2+ and Ni2+ Ions and Application in the Photodegradation of Rhodamine B. Materials 2020, 13, 2150.

In the original publication [...].

Efficiency of mixed and rigid occlusal stabilization splints: Randomized clinical trial.

Occlusal stabilization splints are the most common treatment for controlling the deleterious effects of sleep bruxism. This study aimed to evaluate the effectiveness of a low-cost, mixed occlusal splint (MOS) compared to that of a rigid splint. A randomized clinical trial was performed on 43 adults of both sexes with possible sleep bruxism and satisfactory dental conditions. They were divided into rigid occlusal splint (ROS) (n = 23) and MOS (n = 20) groups. Masticatory muscle and temporomandibular joint (TMJ) pain intensity (visual analog scale), quality of life (WHOQOL-BREF), indentations in the oral mucosa, anxiety, and depression (HADS), number of days of splint use, and splint wear were evaluated. All variables were evaluated at baseline (T0), 6 months (T6), and 12 months (T12) after splint installation (T0), and splint wear was evaluated at T6 and T12. Student's t-test, Mann-Whitney U test, non-parametric Friedman's analysis of variance for paired samples and pairwise multiple comparisons, Pearson's chi-square test, two-proportion z-test, non-parametric McNemar's and Cochran's Q, and Wilcoxon tests were used (p < 0.05). In both groups, there was a decrease in TMJ pain and pain intensity over time and improvements in the quality of life scores. At T6, there was a higher rate of splint wear in the MOS group than in the ROS group (p = 0.023). The MOS showed a higher rate of wear than the rigid splint but had similar results for the other variables. Therefore, the use of a mixed splint appears to be effective in controlling the signs and symptoms of sleep bruxism.

Influence of coating dental enamel with a TiF4-loaded polymeric primer on the adverse effects caused by a bleaching gel with 35% H2O2.

OBJECTIVE: To evaluate whether coating enamel with a polymeric primer (PPol) containing titanium tetrafluoride (TiF4) before applying a bleaching gel with 35% H2O2 (35% BG) increases esthetic efficacy, prevents changes in morphology and hardness of enamel, as well as reduces the cytotoxicity from conventional in-office bleaching. MATERIALS AND METHODS: Standardized enamel/dentin discs were stained and bleached for 45 min (one session) with 35% BG. Groups 2TiF4, 6TiF4, and 10TiF4 received the gel on the enamel previously coated with PPol containing 2 mg/mL, 6 mg/mL, or 10 mg/mL, respectively. No treatment or application of 35% BG directly on enamel were used as negative control (NC), and positive control (PC), respectively. UV-reflectance spectrophotometry (CIE L*a*b* system, ΔE00, and ΔWI, n = 8) determined the bleaching efficacy of treatments. Enamel microhardness (Knoop, n = 8), morphology, and composition (SEM/EDS, n = 4) were also evaluated. Enamel/dentin discs adapted to artificial pulp chambers (n = 8) were used for trans-amelodentinal cytotoxicity tests. Following the treatments, the extracts (culture medium + bleaching gel components diffused through the discs) were collected and applied to odontoblast-like MDPC-23 cells, which were assessed concerning their viability (alamarBlue, n = 8; Live/Dead, n = 4), oxidative stress (n = 8), and morphology (SEM). The amount of H2O2 in the extracts was also determined (leuco crystal violet/peroxidase, n = 8). The numerical data underwent one-criterion variance analysis (one-way ANOVA), followed by Tukey's test, at a 5% significance level. RESULTS: Regarding the ΔE00, no difference was observed among groups 2TiF4, 6TiF4, and PC (p > 0.05). The ΔWI was similar between groups 2TiF4 and PC (p > 0.05). The ΔWI of group 6TiF4 was superior to PC (p < 0.05), and group 10TiF4 achieved the highest ΔE00 and ΔWI values (p < 0.05). Besides limiting enamel microstructural changes compared to PC, group 10TiF4 significantly increased the hardness of this mineralized dental tissue. The highest cellular viability occurred in 10TiF4 compared to the other bleached groups (p < 0.05). Trans-amelodentinal H2O2 diffusion decreased in groups 2TiF4, 6TiF4, and 10TiF4 in comparison with PC (p < 0.05). CONCLUSION: Coating enamel with a PPol containing TiF4 before applying a 35% BG may increase enamel microhardness and esthetic efficacy and reduce the trans-amelodentinal cytotoxicity of conventional in-office tooth bleaching. The PPol containing 10 mg/mL of TiF4 promoted the best outcomes.

Risk of heart failure in ambulatory resistant hypertension: a meta-analysis of observational studies.

The impact of ambulatory resistant hypertension (ARH) on the occurrence of heart failure (HF) is not yet completely known. We performed for the first time a meta-analysis, by using published data or available data from published databases, on the risk of HF in ARH. Patients with ARH (24-h BP ≥ 130/80 mmHg during treatment with ≥3 drugs) were compared with those with controlled hypertension (CH, clinic BP < 140/90 mmHg and 24-h BP < 130/80 mmHg regardless of the number of drugs used), white coat uncontrolled resistant hypertension (WCURH, clinic BP ≥ 140/90 mmHg and 24-h BP < 130/80 mmHg in treated patients) and ambulatory nonresistant hypertension (ANRH, 24-h BP ≥ 130/80 mmHg during therapy with ≤2 drugs). We identified six studies/databases including 21,365 patients who experienced 692 HF events. When ARH was compared with CH, WCURH, or ANRH, the overall adjusted hazard ratio for HF was 2.32 (95% confidence interval (CI) 1.45-3.72), 1.72 (95% CI 1.36-2.17), and 2.11 (95% CI 1.40-3.17), respectively, (all P < 0.001). For some comparisons a moderate heterogeneity was found. Though we did not find variables that could explain the heterogeneity, sensitivity analyses demonstrated that none of the studies had a significant influential effect on the overall estimate. When we evaluated the potential presence of publication bias and small-study effect and adjusted for missing studies identified by Duval and Tweedie's method the estimates were slightly lower but remained significant. This meta-analysis shows that treated hypertensive patients with ARH are at approximately twice the risk of developing HF than other ambulatory BP phenotypes.

The spleen is the graveyard of CD4+ cells in patients with immunological failure of visceral leishmaniasis and AIDS.

BACKGROUND: Visceral leishmaniasis (VL), or kala-azar, is a common comorbidity in patients with AIDS in endemic areas. Many patients continue to experiences relapses of VL despite virological control, but with immunological failure. These patients remain chronically symptomatic with hypersplenism, for example with anemia, leukopenia, and thrombocytopenia, and are at risk of severe co-infection due to low CD4+ count. Therefore, in this study, splenectomized patients with VL and HIV infection were investigated to understand why the CD4+ count fails to recover in these patients, evaluating the importance of spleen mass for hypersplenism and immunological failure. METHODS: From a retrospective open cohort of 13 patients who had previously undergone splenectomy as salvage therapy for relapsing VL, 11 patients with HIV infection were investigated. This study compared the patients' complete blood cell count (CBC) and CD4+ and CD8+ cell counts before and after splenectomy with respect to spleen weight. RESULTS: CBC was substantially improved after splenectomy, indicating hypersplenism. However, to the best of our knowledge, this is the first study to show that spleen mass is strongly and negatively correlated with CD4+ cell count (ρ = -0.71, P = 0.015). CONCLUSIONS: This finding was unexpected, as the spleen is the most extensive lymphoid tissue and T-lymphocyte source. After reviewing the literature and reasoning, we hypothesized that the immunological failure was secondary to CD4+ loss initially by apoptosis in the spleen induced by productive HIV infection and, subsequently, by pyroptosis sustained by parasitic infection in spleen macrophages.

Chitosan-Calcium Aluminate as a Cell-homing Scaffold: Its Bioactivity Testing in a Microphysiological Dental Pulp Platform.

In vitro models of the dental pulp microenvironment have been proposed for the assessment of biomaterials, to minimise animal use in operative dentistry. In this study, a scaffold/3-D dental pulp cell culture interface was created in a microchip, under simulated dental pulp pressure, to evaluate the cell-homing potential of a chitosan (CH) scaffold functionalised with calcium aluminate (the 'CHAlCa scaffold'). This microphysiological platform was cultured at a pressure of 15 cm H2O for up to 14 days; cell viability, migration and odontoblastic differentiation were then assessed. The CHAlCa scaffold exhibited intense chemotactic potential, causing cells to migrate from the 3-D culture to its surface, followed by infiltration into the macroporous structure of the scaffold. By contrast, the cells in the presence of the non-functionalised chitosan scaffold showed low cell migration and no cell infiltration. CHAlCa scaffold bioactivity was confirmed in dentin sialophosphoprotein-positive migrating cells, and odontoblastic markers were upregulated in 3-D culture. Finally, in situ mineralised matrix deposition by the cells was confirmed in an Alizarin Red-based assay, in which the CHAlCa and CH scaffolds were adapted to fit within dentin discs. More intense deposition of matrix was observed with the CHAlCa scaffold, as compared to the CH scaffold. In summary, we present an in vitro platform that provides a simple and reproducible model for selecting and developing innovative biomaterials through the assessment of their cell-homing potential. By using this platform, it was shown that the combination of calcium aluminate and chitosan has potential as an inductive biomaterial that can mediate dentin tissue regeneration during cell-homing therapies.

Physico-chemical characterization of the tumour microenvironment of pancreatic ductal adenocarcinoma.

Pancreatic ductal adenocarcinoma (PDAC) is a highly aggressive lethal malignancy that accounts for more than 90% of pancreatic cancer diagnoses. Our research is focused on the physico-chemical properties of the tumour microenvironment (TME), including its tumoural extracellular matrix (tECM), as they may have an important impact on the success of cancer therapies. PDAC xenografts and their decellularized tECM offer a great material source for research in terms of biomimicry with the original human tumour. Our aim was to evaluate and quantify the physico-chemical properties of the PDAC TME. Both cellularized (native TME) and decellularized (tECM) patient-derived PDAC xenografts were analyzed. A factorial design of experiments identified an optimal combination of factors for effective xenograft decellularization. Our results provide a complete advance in our understanding of the PDAC TME and its corresponding stroma, showing that it presents an interconnected porous architecture with very low permeability and small pores due to the contractility of the cellular components. This fact provides a potential therapeutic strategy based on the therapeutic agent size.

Exploration of Polyphenols Extracted from Cytisus Plants and Their Potential Applications: A Review.

The increasing world population means an increased demand for sustainable processes and products related to foods, particularly those with added health benefits. Plants can be an alternative source of nutritional and biofunctional ingredients. Cytisus plants are an underexploited bioresource, currently prevalent in the Mediterranean Basin and western Asia. This manuscript addresses the processing potential of Cytisus plants for the development of added-value products, including food formulations, food packaging, cosmetics, and therapeutic applications. Most research has reported that Cytisus spp. are a promising source of inexpensive bioactive polyphenol compounds. Cytisus flowers should be considered and exploited as raw materials for the development of new food ingredients (antioxidants, preservatives, additives, etc.), nutraceuticals, or even direct therapeutic agents (anticancer, antibacterial, etc.). In order to evaluate the socioeconomic effect of these underutilized plants, more research is needed to assess their valorization for therapeutic and dietary possibilities, as well as the economic impact.

Ionic Thermoelectric Generators in Vertical and Planar Topologies Based on Fluorinated Polymer Hybrid Materials with Ionic Liquids.

Ionic thermoelectrics (TEs), in which voltage generation is based on ion migration, are suitable for applications based on their low cost, high flexibility, high ionic conductivity, and wide range of Seebeck coefficients. This work reports on the development of ionic TE materials based on the poly(vinylidene fluoride-trifluoroethylene), Poly(VDF-co-TrFE), as host polymer blended with different contents of the ionic liquid, IL, 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, [EMIM][TFSI]. The morphology, physico-chemical, thermal, mechanical, and electrical properties of the samples are evaluated together with the TE response. It is demonstrated that the IL acts as a nucleating agent for polymer crystallization. The mechanical properties and ionic conductivity values are dependent on the IL content. A high room temperature ionic conductivity of 0.008 S cm-1 is obtained for the sample with 60 wt% of [EMIM][TFSI] IL. The TE properties depend on both IL content and device topology-vertical or planar-the largest generated voltage range being obtained for the planar topology and the sample with 10 wt% of IL content, characterized by a Seebeck coefficient of 1.2 mV K-1 . Based on the obtained maximum power density of 4.9 µW m-2 , these materials are suitable for a new generation of TE devices.

Association between clinical outcomes, peripheral blood and cytomorphologic features of bone marrow in visceral leishmaniasis.

INTRODUCTION: An intracellular parasite of mononuclear phagocytes, mainly distributed in the bone marrow and the spleen, causes visceral leishmaniasis. Complete blood count (CBC) reveals the poorly understood pathogenesis of anemia, leukopenia and thrombocytopenia. Our study aimed to compare the CBC with bone marrow cytomorphological features and their association with clinical outcomes to clarify this relevant issue. METHODS: The CBC and bone marrow of 118 patients were described by two hematologists and compared to check their association with each other and mortality. RESULTS: Peripheral cytopenias were common findings, particularly anemia, as seen in almost all patients. No relationship was found between values of hemoglobin, neutrophils and platelet count with fatal outcomes. The bone marrow was normocellular in 61.9% of the cases. Dysplasia figures were frequent and 49.1% of the samples had dysgranulopoiesis. Additionally, erythroid hyperplasia was found in 72% of the patients with severe anemia. Patients with reduced bone marrow cellularity, erythroid hypercellularity and dyserythropoiesis seem to have a riskier disease. CONCLUSION: The study results suggest that the bone marrow of patients with visceral leishmaniasis manifests a reactional pattern to the inflammatory event, thereby modulating cytokines and other colony growth factors. This compensatory response may be dysplastic and ineffective and generate peripheral cytopenias of varying intensity. Further studies are needed to clarify the signaling pathways involved, which may be used as therapeutic tools in the future.

Catalysis-based approaches with biopolymers and violet LED to improve in-office dental bleaching.

This in vitro experimental investigation aimed to evaluate the impact of the combined application of a nanofiber scaffold (NS), a polymeric catalyst primer (PCP) containing 10 mg/mL of heme peroxidase enzyme, and violet LED (LEDv) on the esthetic efficacy (EE), trans-amelodentinal cytotoxicity (TC), and procedural duration of conventional in-office bleaching therapy. To achieve this, 96 standardized enamel/dentin discs were individually placed in artificial pulp chambers. A 35% hydrogen peroxide (H2O2) bleaching gel was administered for 45, 30, or 15 min to the enamel, either previously coated with NS + PCP or left uncoated, followed by irradiation with LEDv for 15 min or no irradiation. The established groups were as follows: G1, negative control (no treatment); G2, 35% H2O2/45 min; G3, NS + PCP + LEDv; G4, NS + PCP + 35%H2O2/45 min + LEDv; G5, NS + PCP + 35%H2O2/30 min + LEDv; and G6, NS + PCP + 35%H2O2/15 min + LEDv. Extracts (culture medium + gel components diffused through the discs) were collected and applied to odontoblast-like MDPC-23 cells. EE (ΔE00 and ΔWI) and TC were assessed using ANOVA/Tukey analysis (p < 0.05). The EE analysis revealed no statistical differences between G6 and G2 (p > 0.05). Cells in G6 exhibited higher viability and lower oxidative stress compared to other bleached groups (p < 0.05). In conclusion, employing NS + PCP + LEDv to catalyze a 35%H2O2 bleaching gel applied for 15 min to the enamel resulted in successful esthetic improvements and reduced the cytotoxicity commonly linked with traditional in-office bleaching procedures.

Biodegradable and biocompatible collagen-based hybrid materials for force sensing applications.

With the aim of replacing synthetic macromolecules by biological macromolecules for advanced applications, collagen films were produced with two different ionic liquids (ILs), choline dihydrogen phosphate ([Ch][DHP]) and choline serinate ([Ch][Seri]), added in order to modulate the electrical responses. The films were prepared by casting, varying IL content between 0 and 6 wt%. The morphology and thermal properties of the resulting films were found to be independent of both IL type and content. However, the highest direct curret (d.c.) electrical conductivity (1.4 × 10-8 S·cm-1) was achieved for collagen films containing 3 wt% [Ch][DHP]. Furthermore, it was demonstrated that IL/collagen films were non-cytotoxic, with cell activity values exceeding 70 %. These collagen films were proven to be suitable for force sensing applications, displaying excellent sensitivity and stability upon repeated testing.

Unveiling Challenges and Opportunities in Silicon-Based All-Solid-State Batteries: Thin-Film Bonding with Mismatch Strain.

Li-metal and silicon are potential anode materials in all-solid-state Li-ion batteries (ASSBs) due to high specific capacity. However, both materials form gaps at the interface with solid electrolytes (SEs) during charging/discharging, resulting in increased impedance and uneven current density distribution. In this perspective, the different mechanisms of formation of these gaps are elaborated in detail. For Li-metal anodes, Li-ions are repeatedly stripped and unevenly deposited on the surface, leading to gaps and Li dendrite formation, which is an unavoidable electrochemical behavior. For Si-based anodes, Li-ions inserting/extracting within the Si-based electrode causes volume changes and a local separation from the SE, which is a mechanical behavior and avoidable by mitigating the strain mismatch of thin-film bonding between anode and SE. Si electro-chemical-mechanical behaviors are also described and strategies recommended to synergistically decrease Si-based electrode strain, including Si materials, Si-based composites, and electrodes. Last, it is suggested to choose a composite polymer-inorganic SE with favorable elastic properties and high ionic conductivity and form it directly on the Si-based electrode, beneficial for increasing SE strain to accommodate stack pressure and the stability of the interface. Thus, this perspective sheds light on the development and application of Si-based ASSBs.

The status of combination therapy for visceral leishmaniasis: an updated review.

For the past 15 years, trials of combination therapy options for visceral leishmaniasis have been conducted with the aim of identifying effective, and safe treatment regimens that were shorter than existing monotherapy regimens and could also prevent or delay the emergence of drug resistance. Although first-line treatment currently relies on combination therapy in east Africa, this is not true in Latin America owing to disappointing trial results, with lower than expected efficacy seen for the combination treatment group. By contrast, several effective combination therapy regimens have been identified through trials on the Indian subcontinent; yet, first-line therapy is still AmBisome monotherapy as the drug is part of a free donation programme and is highly effective in this region. Achieving a short all-oral combination treatment will require new chemical entities, several of which are currently under evaluation. Future studies should systematically include pharmacological substudies to ensure optimal dosing for all patient groups. To achieve maximal impact of new combination treatments, mechanisms to ensure drug availability and access after trials should be established. Enhancing the longevity of current and novel treatments will require effective systems for early detection of emerging drug resistance.

Efficiency of mixed and rigid occlusal stabilization splints: Randomized clinical trial

Abstract Occlusal stabilization splints are the most common treatment for controlling the deleterious effects of sleep bruxism. This study aimed to evaluate the effectiveness of a low-cost, mixed occlusal splint (MOS) compared to that of a rigid splint. A randomized clinical trial was performed on 43 adults of both sexes with possible sleep bruxism and satisfactory dental conditions. They were divided into rigid occlusal splint (ROS) (n = 23) and MOS (n = 20) groups. Masticatory muscle and temporomandibular joint (TMJ) pain intensity (visual analog scale), quality of life (WHOQOL-BREF), indentations in the oral mucosa, anxiety, and depression (HADS), number of days of splint use, and splint wear were evaluated. All variables were evaluated at baseline (T0), 6 months (T6), and 12 months (T12) after splint installation (T0), and splint wear was evaluated at T6 and T12. Student's t-test, Mann-Whitney U test, non-parametric Friedman's analysis of variance for paired samples and pairwise multiple comparisons, Pearson's chi-square test, two-proportion z-test, non-parametric McNemar's and Cochran's Q, and Wilcoxon tests were used (p < 0.05). In both groups, there was a decrease in TMJ pain and pain intensity over time and improvements in the quality of life scores. At T6, there was a higher rate of splint wear in the MOS group than in the ROS group (p = 0.023). The MOS showed a higher rate of wear than the rigid splint but had similar results for the other variables. Therefore, the use of a mixed splint appears to be effective in controlling the signs and symptoms of sleep bruxism.

Viability and oxidative stress of dental pulp cells after indirect application of chemomechanical agents: An in vitro study.

AIM: This study evaluated the transdentinal cytotoxic effects of enzymatic agents (EA) for chemomechanical carious tissue removal on human dental pulp cells. METHODOLOGY: The groups were based on the performed dentine treatments (n = 8): G1: Positive Control (PC - no treatment); G2: Negative Control (NC - 35% H2 O2 for 2 min); G3: Brix 3000™ (BX) for 30 s; G4: BX for 2 min; G5: Papacarie Duo™ (PD) for 30 s; G6: PD for 2 min. The cells were evaluated for viability (VB; MTT assay) and production of reactive oxygen species (ROS; DCFH-DA assay) and nitric oxide (NO; Griess reagent). A scanning electron microscope provided morphological chemical analyses and energy-dispersive X-ray spectroscopy. The data were submitted to the one-way anova statistical test complemented by Tukey (p < .05). RESULTS: Cell viability decreased by 21.1% and 58.4% in G5 and G6, respectively. ROS production in G3 and G4 maintained basal levels but increased by 171.2% and 75.1% in G5 and G6, respectively. CONCLUSIONS: The Brix3000™ enzymatic agent did not cause indirect cytotoxic effects on pulp cells, regardless of the application time. Conversely, Papacarie Duo™ reduced viability and increased ROS production by pulp cells.

Predictors of Interstitial Lung Disease in Mixed Connective Tissue Disease.

Interstitial lung disease (ILD) frequently complicates mixed connective tissue disease (MCTD) and contributes to increased mortality. We aimed to identify predictors of ILD in MCTD patients. This is a nationwide, multicentre, retrospective study including patients with an adult-onset MCTD clinical diagnosis who met Sharp's, Kasukawa, Alarcón-Segovia, or Kahn's diagnostic criteria and had available chest high-resolution computed tomography (HRCT) data. Univariate and multivariate analyses were conducted. We included 57 MCTD patients, with 27 (47.4%) having ILD. Among ILD patients, 48.1% were asymptomatic, 80.0% exhibited a restrictive pattern on pulmonary function tests, and 81.5% had nonspecific interstitial pneumonia on chest HRCT. Gastroesophageal involvement (40.7% vs. 16.7%, p = 0.043) and lymphadenopathy at disease onset (22.2% vs. 3.3%, p = 0.045) were associated with ILD. Binary logistic regression identified lymphadenopathy at disease onset (OR 19.65, 95% CI: 1.91-201.75, p = 0.012) and older age at diagnosis (OR 1.06/year, 95% CI: 1.00-1.12, p = 0.046) as independent ILD predictors, regardless of gender and gastroesophageal involvement. This study is the first to assess a Portuguese MCTD cohort. As previously reported, it confirmed the link between gastroesophageal involvement and ILD in MCTD patients. Additionally, it established that lymphadenopathy at disease onset and older age at diagnosis independently predict ILD in MCTD patients.

Process modeling, environmental and economic sustainability of the valorization of whey and eucalyptus residues for resveratrol biosynthesis.

Biomass is one of the renewable resources with the greatest potential, not only because of the possibility of energy recovery but also because of its content in components of interest. In this context, the regions of Galicia and Portugal have large areas of land dedicated to forestry, agriculture and livestock, and the large amount of waste generated represents a cost for the producer. The importance of these facts has aroused great interest in society to focus its interest on improving the current situation while seeking a benefit, both environmental and economic, from existing resources. That is why the integration of biotechnological processes and biorefinery for their valorization are considered key aspects in the way of producing bioproducts and bioenergy. This research article proposes a process for producing resveratrol from whey from the dairy industry and eucalyptus residues from forestry exploitation. In order to evaluate its suitability, a techno-economic analysis and an environmental assessment have been carried out using the Life Cycle Assessment (LCA) methodology. The results obtained show the potential of these scenarios both from the economic point of view, by obtaining a minimum sale price of resveratrol to ensure the viability of the process below the market average, and from the environmental point of view, being eucalyptus residues those that result in a lower contribution to the environment per unit of resveratrol produced. Future research should focus on increasing the throughput of the production process to increase its profitability and on reducing energy requirements throughout the process, as these have been the main critical points identified. In addition, following the sensitivity assessment, it has been concluded that opting for renewable energy is the most sustainable option.